Description
Alpine MRV-M500
V-Power Mono Block Amplifier
V-Power is back and stronger than ever!
V-Power is back and stronger than ever!
The AlpineMRV-M500 V-Power Mono Block Amplifier features speaker level inputs that connect directly to almost any factory radio, without the need for external converters, so you can keep your factory system and upgrade to Alpine sound.
Power Output
- Per Channel into 4ohms @ 14.4V: 300W RMS x 1
- Per Channel into 2ohms @ 14.4V: 500W RMS x 1
With a non shut-down design, even if you pound your music for a long time, these amps won’t shut down. They use a heat thermal management processor to make sure the heat level never gets too high – which means no distortion and no interruptions.
Plus, add the RUX-KNOB (sold seperately) and get full control from the dash for instant bass adjustment. You also get the ability to control multiple amps from just one controller with simple telephone cord adapters.
* 1 Year Warranty as per Alpine Electronics Australia T&C’s
Alpine MRV-M500 – Features
- Mono Output Channel
- 1100W Max Power
- 1 x 500W (2?), 1 x 300W (4?) RMS Power Output [@14.4V 1%THD]
- Class-D Amplification Circuit
- Input Gain adjustment 0,2V–4V
- Bass EQ
- Low Pass Filter
- Speaker Level input
- Thermal Management Processor
Alpine MRV-M500 – Specifications
Power Output
- Per Channel into 4ohms @ 14.4V: 300W RMS x 1
- Per Channel into 2ohms @ 14.4V: 500W RMS x 1
- THD+N (Reference: 10W / rated power into 4 ohms): 0.02% / 0.2%
- THD+N (Reference: 10W / rated power into 2 ohms): 0.03% / 0.3%
- S/N Ratio: (IHF A weighted, Reference: rated power into 4 ohms): >105dB
- S/N Ratio: (IHF A weighted, Reference 1W into 4 ohms): >85dB
- Frequency Response (Reference 1W into 4 ohms): 7Hz-400Hz (+0/-3dB)
- Damping Factor (Reference 10W into 4 ohms @ 100Hz): >750
Input Sensitivity
- RCA Input (Reference rated power into 4ohms): 0.15-4.0V
- Speaker Level Input (Reference rated power into 4ohms): 0.4-10V
Crossover
- Variable HPF/LPF: LFP 50Hz-400Hz (-24dB/oct.)
Equaliser
- Bass EQ (fc=50Hz): 0 to +12dB (variable)
Remote Level*
- Linear Atetnuation: 0 to -20dB
*Requires optional RUX-KNOB
General
- Preamp Output: Ch1/2 Input Pass-through, Buffered: 4V max
- Input Impedance: >10k ohms
Dimensions
- Width overall: 200mm (7-7/8″)
- Heatsink only: 165mm (6-1/2″)
- Height: 55mm (2-3/16″)
- Depth: 200mm (7-7/8″)
- Weight: 1.8kg
Note: Specifications and design and subject to change without notice.
Signature Car Sound your local Premium Alpine Car Stereo Specialists on the Sunshine Coast
