Outstanding System-Building Flexibility

The PDX-V9 gives you the flexibility you need to meet any customer request. In addition to the normal 4.1-Channel system, this amp makes it easy to create an active front 2-way + Subwoofer system, a bridged connection system or a 2.1-Channel system. What’s more, the Selectable Input Channel Switch lets you change the number of input channels, making 5- or 4-Channel output possible with only 2-Channel input.

Remote Bass Control

The PDX-V9 has a Remote Bass Control port for attaching the Remote Control Bass Knob (RUX-KNOB), sold separately. It provides 20dB of bass level adjustment that can be easily dialed up and down. The RUX-KNOB comes with a 5m cable for installation in any convenient location.

New Reference Grade Output Stage

Ultra-Wide Frequency Response

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-400Hz (+0,-3dB).

Total Harmonic Distortion(THD+N) vs. Power

The PDX Audiophile series amplifiers are not your typical class-D amplifiers. Traditionally, class-D amplifiers have not been known for both low distortion and wide frequency response. These PDX amplifiers are the first ever class-D amplifiers to break tradition and trump the amps of yesterday. The PDX-V9 are synonymous with extremely high resolution and detail.

Total Harmonic Distortion(THD+N) vs. Frequency

Uniquely PDX, distortion actually decreases at higher frequencies, resulting in a clean and clear signal where your ear is most sensitive to distortion. -<0.005% THD+N @ 1W, <0.05% THD+N @ rated power.

Signal to Noise

These amps are capable of unheard of S/N ratios up to 116dB 4CH. / 121dB Sub at rated power for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX amps deliver crystal clear music every time.

Damping Factor

With ultra-low output impedance, the new PDX offers extremely controlled, tight bass for unprecedented sound quality. Ratings are >1000 for Mono and >500 for 4ch at 100Hz.

Power Output to the Extreme

 

Beefed up Power

The PDX power supply delivers tremendous headroom with low distortion and noise. PDX amplifiers have an extremely high total system efficiency of ~80% (power supply is rated at >90%, output stage is rated >90%).

Low Impedance Stability

These amps are stable at low impedances and are capable of their rated power from 2 to 4 ohms. This allows excellent flexibility with multiple speaker and subwoofer loads and is adjusted automatically.

Certified Power From Birth, GuaranteedEach PDX amplifier comes with its very own birth-sheet. PDX amplifiers are tested and documented to show their true actual output.

 

 

 

Power Management Processor

PDX amps incorporate Alpine’s new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power output for non-stop listening.

Power Output to the Extreme (Cont.)

If the amp gets too hot, the Thermal Protection circuit kicks in and gradually decreases output power until it cools down. Once cool, the power output automatically increases back to the previous level. If the circuit detects a Low Battery condition, it will gradually decrease power output if battery voltage becomes too low. Once the battery voltage increases, power will be restored. This interruption-free design allows for non-stop enjoyment with no hiccups or drop-outs, just clean, clear output.

Application Flexibility

Unique Stacking System

The new PDX series amplifiers are 20% thinner than previous models at only 2” thick. New stacking system packs the amps closer together so there are no gaps and to save space in the trunk while directly coupling the amps heatsinks to help share cooling duties.

Speaker terminals

The super high power speaker connectors allow for up to 8GA wiring and have a unique quick disconnect design for simple error-free installation

Power Connector

The new removable connector features a low-loss, high-current design. It accepts up to 4GA wire, to ensure your amp gets the power it needs while allowing for easy installation.

Remote Control Bass Knob (RUX-KNOB)

Simply add the RUX-KNOB (sold separately),and get full control from the dash for remote on-the-fly bass adjustments. You also have the ability to control multiple amps from just one controller with simple telephone cord adapters.

A Touch of Personalisation

PDX amplifiers come with removable trim rings, allowing them to be easily custom painted to match your vehicle or personalized to anything you want. Add it as another Do-It-Yourself project, or leave it to professionals and ask an Authorized Alpine retailer/installer near you

Alpine PDX-V9 – SPECIFICATIONS

CEA-2006 Power Ratings

• CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)

Max Power Output Ratings

• Max Power: 1600W

RMS Power Ratings

• Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
• Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
• Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)

Sound Tuning

• Crossover Frequency (CH1/2, HPF): 30 – 600 Hz (x1), 300 – 6k Hz (x10), -12 dB/oct.
• Crossover Frequency (CH3/4, HPF): 30 – 600 Hz (x1), -12 dB/oct.
• Crossover Frequency (CH3/4, BPF): 30 – 600 Hz (HPF), 300 – 6k Hz (LPF), -12 dB/oct.
• Crossover Frequency (Subwoofer): 50 – 600 Hz, -24 dB/oct.
• Subsonic Filter: 3 – 30 Hz, -24 dB/oct.

Dimensions

• Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
• Foot Print (WxHxD) in: 10-1/8” x 2” x 7-1/2”

General

• Power Requirements: 14.4 V.DC (11-16 V allowable)
• Input Sensitivity (RCA Input): 0.2 – 4 V (CH1/2, CH3/4), 0.1 – 4 V (Subwoofer)
• Input Impedance: >10k ohms
• Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 – 100k Hz
• Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 – 600 Hz
• THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %
• THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %
• THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %
• THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %
• Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz
• Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz
• Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB
• Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB
• Weight: 2.7 kg

Alpine PDX-V9 -FEATURES

Install

• Connectors: Quick Connect Terminals for Power Supply and Speaker Output
• Terminal Layout: One-Sided
• Mounting Design: Easy Stacking and Smart Installation

General

• Amplifier Type: Class-D (Digital)
• Channel Design: 4-channel + 1-channel (Mono)
• Power Supply Design: DC-DC PWM Power Supply
• Pre-Amp Stage: Discreat
• Final Outputs: MOSFET
• Crossover: Variable High Pass, Low Pass and Band Pass Filter
• Gain Control: Continuously Adjustable Gain Control
• Subsonic Filter: Variable Subsonic Filter
• Bass Control: Remote Bass Control (RUX-KNOB) Ready
• Low-battery Protection: Low-battery Protection
• Low-impedance Possibility: Low-impedance Possibility
• Current Protection: Over-Current, Over-Voltage and Thermal Protection
• Board Circuitry: S.T.A.R. Circuit
• Board Design: 6-layer Glass Epoxy PC Board
• Power Indicator: Top Mounted LED Power/Status Indicator
• Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
• Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
• Thermal Control: Thermal Management Control

Signature Car Sound – Home of Alpine on the Sunshine Coast

Authorised Alpine Electronics Australia Dealer, Stockist Installation Centre

* 1 Year Warranty as per Alpine Electronics Australia Terms and Conditions